Documents from 2006
Three-Dimensional Imaging of 30-nm Nanospheres Using Immersion Interferometric Lithography, Jianming Zhou, Yongfa Fan, and Bruce W. Smith
Documents from 2005
Inversion Ranks for Lossless Compression of Color Palette Images, Ziya Arnavut and Ferat Sahin
Proposed exergetic based leak detection and diagnosis methodology for automotive carbon dioxide air conditioning systems, Erin Canfield
A Quantitative Assessment of the Benefit of a Learning Community Environment, Mario H. Castro-Cedeno
Modeling of diesel particulate emissions aftertreatment system using non-thermal plasma, Cheng Chen
Deposition of inhaled particles in a symptomatic asthmatic human respiratory tract, John N. DiFlorio
An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels, Nathan J. English
Utilizing neural networks to proactively monitor energy usage in City of Rochester buildings, Brian J. Gillis
Free vibration of sandwich plates with viscoelastic cores, Devlin Hayduke
Hybrid Multivariable Controller Architecture, Mark A. Hopkins, David Smith, Phillip Vallone, and Richard Sandor
Characterization of Surface Roughness Effects on Pressure Drop in Single-Phase Flow in Minichannels, Satish G. Kandlikar, Derek Schmitt, Andres L. Carrano, and James B. Taylor
Deployment Experiments for Ballooning on Mars (DEBOM), Aimee Nicolette Lemieux
An Evaluation Of A Multigrid Algorithm Error Spike Correction Method, Erika L. McMichael
Investigation of a coupled duffing oscillator system in a varying potential field, Joseph Patrick O'Day
High temperature effect of geopolymeric coatings on concretes, Natalya Privorotskaya
Modification of a longitudinal wind tunnel balance for identification of Micro Air Vehicle instabilities, Joshua A. Shreve
25nm Immersion Lithography at a 193nm Wavelength, Bruce W. Smith, Yongfa Fan, Michael Slocum, and Lena Zavyalova
Evaluation of Numerical, Analytical, and Experimental Particle Deposition in Simple and Lung Geometries, Pamela M. Snyder
Analytical Investigations of Modified Active Remote Dynamic Vibration Absorbers, Piyes SrungBoonmee
Application of Particle Swarm Techniques in Sensor Network Configuration, Jason C. Tillett, Shanchieh Jay Yang, Raghuveer Rao, and Ferat Sahin
Darwinian particle swarm optimization, Jason Tillett, T. Rao, Ferat Sahin, and Raghuveer Rao
Dynamic characteristics of a hyperboloid shell of revolution with application to flexible couplings, Brian G. Towner
Experimental and Theoretical Study of a UV Disinfection System for Water Treatment, Wei Yang
Documents from 2004
CFD analysis and validation for solution to micro air vehicle airframes, Taher I. Attari
Experimental study of flow patterns, heat transfer, pressure drop and gravitational orientation during flow boiling in minichannels, Prabhu Balasubramanian
Modeling periodic blade stresses due to stator-rotor interactions using computational fluid dynamics, Lisa M. Barrett
Photoresist Modulation Curves, Anatoly Bourov, Yongfa Fan, Frank C. Cropanese, and Bruce W. Smith
Immersion Microlithography at 193 nm with a Talbot Prism Interferometer, Anatoly Bourov, Yongfa Fan, Frank Cropanese, Neal Lafferty, Lena V. Zavyalova, Hoyoung Kang, and Bruce W. Smith
Synthetic Defocus for Interferometric Lithography, Frank C. Cropanese, Anatoly Bourov, Yongfa Fan, Jianming Zhou, Lena Zayalova, and Bruce W. Smith
Design and Simulation of a MEMS Long Distance Traveling Micro-Actuator, Younes Elkacimi
ILSim: A Compact Simulation Tool for Interferometric Lithography, Yongfa Fan, Anatoly Bourov, Lena Zavyalova, Jianming Zhou, Andrew Estroff, and Bruce W. Smith
Study of Air Bubble Induced Light Scattering Effect On Image Quality in 193 nm Immersion Lithography, Yongfa Fan, Neal V. Lafferty, Anatoly Bourov, Lena Zavyalova, and Bruce W. Smith
Design of a Two-Sensor Camera for Near-Finfrared Aeiral Remote Sensing, Sergio O. Guevara
Design, fabrication, and testing of a miniature impulse turbine driven by compressed gas, Daniel B. Holt
Acoustic signature for chaos and fractal geometries, Obadiah M. Kilonzo
Gray Assist Bar OPC, Neal Lafferty, Geert Vandenberghe, Bruce W. Smith, Matthew Lassiter, and Patrick M. Martin
Dynamically loaded self-aligning journal bearings: A Mobility method approach, Nathan Mayer
Generalized Design of Diffractive Optical Elements Using Neural Networks, Ajay Pasupuleti, Anand Gopalan, Ferat Sahin, and Mustafa A.G. Abushagur
The mapping of velocity profiles in a three generation lung model using Particle Image Velocimetry flow analysis techniques, Adam D. Pruyne
Simulating particle deposition in a human replica lung model, Pravir Rai
Genetic Algorithm Parameter Optimization: Applied to Sensor Coverage, Ferat Sahin and Giuseppe Abbate
An Evolutionary Algorithmic Approach to Learning a Bayesian Network from Complete Data, Ferat Sahin, Jason C. Tillett, Raghuveer Rao, and T. M. Rao
Experimental investigation of surface roughness microstructures and their effects on pressure drop characteristics in rectangular minichannels, Derek J. Schmitt
Amphibian XIS: An Immersion Lithography Microstepper Platform, Bruce W. Smith, Anatoly Bourov, Yongfa Fan, Frank C. Cropanese, and Peter Hammond
Benefiting from Polarization - Effects on High-NA Imaging, Bruce W. Smith, Lena Zavyalova, and Andrew Estroff
Vibration of hollow cylindrical shells with partial constrained layer damping, Nathan E. Smith
Proof of concept design and analysis of active flow control of a supersonic micro-nozzle, Christopher J. Szachta
A Distributed Evolutionary Algorithmic Approach to the Coverage Problem for Submersible Sensors, Jason C. Tillett, Raghuveer Rao, and Ferat Sahin
A Distributed Evolutionary Algorithmic Approach to the Least-Cost Connected Constrained Sub-Graph and Power Control Problem, Jason C. Tillett, Raghuveer Rao, Ferat Sahin, and T. M. Rao
Single phase thermohydraulic performance analysis of microchannel flow geometry for direct chip cooling, Harshal R. Upadhye
Design, Fabrication and Testing of Longitudinal Wind Tunnel Balances for Micro Air Vehicle Applications, Andrew T. Walter
Enhanced closed loop performance using non-dimensional analysis, Michael H. Wilson
Modeling of probe-and-drogue part of an in-flight refueling system, Jie Yan
Automated Aberration Extraction Using Phase Wheel Targets, Lena Zavyalova, Anatoly Bourov, and Bruce W. Smith
In-situ Aberration Monitoring Using Phase Wheel Targets, Lena V. Zavyalova, Bruce W. Smith, Toshifumi Suganaga, Seiji Matsuura, Toshiro Itani, and Julian S. Cashmore
Documents from 2003
Aircraft landing gear simulation and control, Sanoopkumar Ambalaparambil
Steady-state and transient analysis of electro-thermal microactuators using finite element methods, Amarendra Atre
Exploration of an electroactive polymer actuator for application in a grasshopper inspired pneumatic robotic hopper, Christie Bielmeier
Experimental study of heat transfer, pressure drop, and critical heat flux in an oil heated minichannel, Levi Campbell
Identification and prediction of nonlinear dynamics, Andrew Dick
Thermal optimization of a polyimide V-groove actuator for a walking micro-robot, Ritesh Arun Khire
Experimental study of heat transfer from a moving and evaporating meniscus on a heated surface, Wai Keat Kuan
A computational approach to arteriolar bifurcations: evaluation of factors influencing predicted wall shear stress, Charles Robinson
Multidisciplinary Microrobotics Teaching Activities In Engineering Education, Ferat Sahin and Wayne Walter
JAVA software for LiBr-water absorption refrigeration system evaluation, Indraneel Samanta
Steady state and transient analysis of thermoelectric devices using finite element method, Gurjinder Singh
Forbidden Pitch or Duty-Free: Revealing the Causes of Across-Pitch Imaging Differences, Bruce W. Smith
Water Immersion Optical Lithography for the 45nm Node, Bruce W. Smith, Hoyoung Kang, Anatoly Bourov, Frank Cropanese, and Yongfa Fan
Particle Swarm Optimization for the Clustering of Wireless Sensors, Jason C. Tillett, Raghuveer Rao, Ferat Sahin, and T. Rao
Sliding mode control of an unmanned air-vehicle system, Jayakrishna Vanaparthy
Experimental Verificaiton of Dual Chamber Vortex Generation for an Absorption Chiller, Yue Zhou
Documents from 2002
Experimental evaluation of impulse turbine designs for chain testing systems, Aaron Donlon
A Novel test bed and stochastic vibration diagnostics for assessing the condition of constant velocity joints, Gregory Kacprzynski
Switching voltage of micro-beam actuators - Analysis, fabrication and test, Eui-Shin Kim
A Swarm intelligence based approach to the mine detection problem, Vignesh Kumar and Ferat Sahin
Analysis of the droplet size reduction in a pMDI to the addition of a turbulence generating nozzle, Michael Medlar
An Investigation into the sources of vehicle tire noise, John Paoff
A Self regenerating diesel emissions particulate trap using a non-thermal plasma, Bryce Rampersad
Deep structures wet etched into lithium niobate using a physical mask, Andrew Randles
A Demonstration in communication and task completion between two autonomous robots, Adam Renzi
AISIMAM – An Artificial immune system based intelligent multi agent model and its application to a mine detection problem, Srividhya Sathyanath and Ferat Sahin
Challenges in High NA, Polarization, and Photoresists, Bruce W. Smith and Julian S. Cashmore
OPC and Image Optimization Using Localized Frequency Analysis, Bruce W. Smith and Dale E. Ewbank
Image Enhancement through Square Illumination Shaping, Bruce W. Smith and Geert Vandenberghe
Heat transfer, pressure drop, and dissolved gas effect during flow boiling in microchannels, Mark Steinke
Vehicle simulations of fuel economy for an automatic transmission and a ratio limited continuously variable transmission, Hemant Suthar
Feasibility study of a permanently implanted prosthetic hand, Matt Williams
Documents from 2001
Dynamic torsional modeling and analysis of a fluid mixer, Joel Berg
Numerical investigation of three dimensional viscous, incompressible flow about a sphere and an ellipsoid, Glenn-Mari Cosmiano
Optimal shape design of steadily-loaded journal bearings using genetic algorithms, Sulaymon Eshkabilov
Effect of surface roughness on heat transfer and fluid flow characteristics at low Reynolds Numbers in small diameter tubes, Shailesh Joshi
Post-test implementation of TWNTN4A correction code at O.3m TCT, Ryuichi Machida
A Study of Obscuration in Catadioptric Lenses, Martin McCallum, Bruce W. Smith, Steve Bassett, Julian S. Cashmore, and James E. Webb
Experimental and analytical investigation of a passive remote electromechanical dynamic absorber, Todd Nichols
Computational flow analysis of a dual chamber vortex generator for an absorption refrigeration system, Amilcar Ramos
A Study of unbalance in hydraulically driven fan systems, Collin Sirco
Experimental study of single and two-phase heat transfer in mini-channel, Shurong Tian
