Abstract
An innovative energy saving ultraviolet disinfection reactor has been developed and tested. The technical approach taken is to establish a relationship between the power consumption and the design features of a UV disinfection system, and then determine these design features by minimizing the power consumption function.
The circular-array type (CAT) UV reactor design consists of four short straight UV bulbs located circumferentially outside a quartz tube. A 4 inches diameter prototype was tested with a water flow rate of 1 1 GPM. Experimental results showed that the CAT UV reactor requires 30% less power consumption (9.6W) compared with a commercial unit (13.8W) to meet the minimum dosage requirement of 400J/m2 for microbial inactivation. The experimental results showed the average dosage for CAT UV reactor is consistent with the analytic results.
Library of Congress Subject Headings
Water--Purification--Disinfection; Ultraviolet radiation; Irradiation
Publication Date
2005
Document Type
Thesis
Student Type
Graduate
Degree Name
Mechanical Engineering (MS)
Department, Program, or Center
Mechanical Engineering (KGCOE)
Advisor
Ali Ogut
Advisor/Committee Member
Amitabha Ghosh
Advisor/Committee Member
P. Venkataraman
Recommended Citation
Yang, Wei, "Experimental and Theoretical Study of a UV Disinfection System for Water Treatment" (2005). Thesis. Rochester Institute of Technology. Accessed from
https://repository.rit.edu/theses/8170
Campus
RIT – Main Campus
Comments
Physical copy available from RIT's Wallace Library at TD460 .Y36 2005