Documents from 2015
Investigation of Reactively Sputtered Titanium Oxide Memristors, Wilkie Olin-Ammentorp
Documents from 2013
Quantum Dot Enhanced Epitaxial Lift-Off Solar Cells, Mitchell F. Bennett
Documents from 2012
Design, fabrication, and characterization of solar cells for high temperature and high radiation space applications, Zachary Bittner
Evaluation of natural plant powders with potential use in antimicrobial packaging applications, Yujie Cheng
Study of poly(acrylic acid) grafted onto polymer surfaces modified by gas phase oxidation techniques, Ameya Khot
Investigation of bolometric and resistive properties of nickel oxide, Shaurya Kumar
Ionic polymer metal composites as tactile sensors, Chris Mieney
Documents from 2011
Copolymerization of Ethylene and 4-Penten-1-ol Using an Aryl Sulfonate Phosphine Palladium Catalyst, Shuo Lin
Optimization of concentrator GaAs photovoltaic devices with InAs quantum dots through substrate misorientation and electroplating, Chelsea Mackos
Fabrication and characterization of Polymer Light Emitting Diodes (PLEDs) for display application, Nikita S. Surve
Blends of UV-cross-linkable model compound and polyimide; Effect of UV exposure on viscosity and mechanical properties, Indraneel Zope
Documents from 2010
Carbon nanotube materials for aerospace wiring, Jack Alvarenga
Purification, processing, and separation of carbon nanotubes and application in lithium ion batteries, Matthew Ganter
Documents from 2009
Material selection for the actuator design for a biomimetic rolling robot conducive to miniaturization, Zachary S. Dotson
Synthesis of 5-halo-3-methoxy-salicylaldiminato nickel catalysts and their use for ethylene polymerization in organic and aqueous media, Nikhil Avinash Kolhatkar
Microplasma MEMS device: its design, fabrication and application in hydrogen generation for fuel cells, BinduMadhav Sabnavis
Fabrication and characterization of organic light emitting diodes for display applications, Omkar Vyavahare
Investigation of defects formed by ion implantation of H2+ into silicon, Patrick Whiting
Investigation of atmospheric microplasma jet for nanofabrication, Konstantin Yurchenko
Documents from 2008
Design, fabrication and applications of microplasma device, Koffi Abalo-Akuvi
Modeling solutions and simulations for advanced III-V photovoltaics based on nanostructures, Ryan Aguinaldo
Nanomaterial synthesis and characterization for energy storage and conversion devices, Roberta A. DiLeo
Polymerization of methyl acrylate and as comonomer with ethylene using single-site catalysts, Sameer S. Vadhavkar
Documents from 2007
Documents from 2006
Development of nickel silicide for integrated circuit technology, Phu H. Do
Investigation of Sputtered Hafnium Oxides for Gate Dielectric Applications in Integrated Circuits, Daniel J. Jaeger
Printing studies with conductive inks and exploration of new conducting polymer compositions, Anupama Karwa
Effect of Nanostructure on the Thermal Oxidation of Atomized Iron, Mohit Kumar, Naveen Rawat, and KSV Santhanam
Investigation of induced charge damage on self-aligned metal-gate MOS devices, Robert Mulfinger
UV and VUV Photo-Oxidation of Fluoropolymer and Carbon Nanotube Surfaces, Bhavin Parekh
Polyvinylidene fluoride composites as an option for proton exchange membranes in fuel cells, Rohini P. Sajanpawar
Dynamic mechanical properties of geopolymer-polymer composites, Kunal Shrotri
Low temperature dopant activation for applications in thin film silicon devices, Eric Woodard
Investigation of poly[4(5)-vinylimidazole] composites and their potential as proton conductive membranes, Jinghang Wu
Documents from 2005
High-reflectance, sputter-deposited aluminum alloy thin thin films for micro-electro-mechanical systems, Lance Barron
Multi-walled carbon nanotube electrodes for sodium borohydride fuel cell, Kedar D. Deshmukh
Al2O3 hosted attenuated phase shift mask materials for 157 nm, Yang Liu
Multilayer Composite Structures for Stress Mitigation in Thin Films and MEMS applications., Michael J. Parthum Sr.
Effect of Added C4-Alcohols on the Structure of Microemulsion Droplets Measured by Small-Angle Neutron Scattering., Elvis A. Zambrano
Documents from 2004
Adhesion of copper to Teflon® FEP and PFA surfaces modified by vacuum UV photo-oxidation downstream from Ar microwave plasma, Wagner Dasilva
Adhesion of copper to polytetrafluoroethylene surfaces modified with vacuum UV radiation downstream from He and Ar microwave plasmas, Hrishikesh R. Desai
Synthesis of styrene and acrylic emulsion polymer systems by semi-continuous seeded polymerization processes, Lynley H. Guckian
Documents from 2003
Investigations on compatibilized and uncompatibilized blends of poly(vinylidene fluoride) and poly(ethylene oxide), Pranita Kulkarni
Nanocomposites based on carbon nanotubes and poly (3-alkylthiophenes) for sensor and charge storage applications, Rajiv N. Sangoi
Documents from 2002
Fiber reinforced composites of a novel pendent polyimide: Optimum processing and mechanical properties, Akshay Kamdar
Documents from 2001
Study of Tantalum nitride diffusion barrier films for coppper interconnect technology, Deepa Gazula
Documents from 2000
Development and evaluation of an intrinsic gettering process for fabrication of integrated circuits, James ii Will
Documents from 1997
Materials for attenuated phase mask application at 193 nm, Shahid Butt
Study of the wear of dental composites using an atomic force microscope, Dale E. Ewbank
Preparation and characterization of bulk nanostructures Cu-Co magnetic alloys, Michael Gartley
Documents from 1996
Aluminum nitride films by reactive sputtering, Alvin Randolph
Documents from 1995
Tantalum oxide thin films for microelectronic applications, Fang-Xing Jiang
Documents from 1994
Characterization of DC reactive sputtered indium tin oxide thin films, Philip Infante
Light emission from silicon, Frederick Seiferth
Plasma modification of poly(ester sulfonic) acid aniomoneric membranes, Linda Slapelis
Documents from 1992
Light scattering study of attractive interactions in a model microemulsion system, Dawn M. Campbell
Development of a Ti:W salicide-nitride based multi-layer metallization for VLSI application, Kevin L. Witt
Documents from 1991
Magnetic resonance imaging studies of the behavior of fluids in gelatin and other porous materials, Brian J. Antalek
Formation of low temperature silicon dioxide films using chemical vapor deposition, Hsiao-Hui Chen
Electron-bean biased reactive evaporation of silicon, silicon oxides, and silicon nitrides, Jen-Yu Yeh
Documents from 1990
Modification of organic polymers with vacuum ultraviolet radiation from inert gas plasmas rotating in a magnetic field, Jian-Xin Chen
Thin film adhesion measurement using excimer laser ablation test, Wen-Chieh Lee
Measurement of thermal conductivities of polymer films with the TC-1000 thermal comparator, Dong Ming Li
Documents from 1989
Thin film electroluminescence, Ian MacKay
Documents from 1987
Evaluation of some multivariate CUSUM schemes, Susan L. Spindler
Documents from 1986
Etching and Passivation Downstream of an O2-CF4-Ar Microwave Plasma, Edward Matuszak
Documents from 1984
Non-linear principal component analysis (approximation by a second-order Taylor series), John Viggiano
