Arjun Wadhwa


Aerosol Jet printing is a non-contact process capable of printing nano-ink patterns on conformal and flexible surfaces. Aqueous or solvent nano-inks are pneumatically atomized by the flow of nitrogen gas. The flow of atomizing gas into and out of the cup leads to evaporation and removal of volatile solvent(s). As the solid loading fraction of the ink increases, the rheological changes eventually lead to instabilities in print output. A potential solution to this problem is to moisten the atomizing ink by running it through a bubbler. In this study, neat co-solvent solutions of ethanol and ethylene glycol at 85: 15 and 30:70 mixing ratios were atomized using nitrogen flow rates ranging from 600 to 1000 ccm. It was observed that ethanol, being the more volatile solvent, was depleted from the neat solution. When using a bubbler solvent add-back system, an excessive amount of ethanol was returned to the neat solution. The rate of solvent loss from an ethanol rich neat solution (80%) was higher compared to an ethylene glycol rich neat solution. A mixture of dry and wet (ethanol moistened) nitrogen gas was used to equalize the rate of ethanol evaporation. Ethanol equilibrium in neat solutions with higher ethylene glycol loading (70%) was achieved with a 40-60% wet nitrogen component while neat solutions with higher ethanol loading (85%) were stable with 85 -90% wet nitrogen gas. The results were validated with copper nano ink with similar co-solvent ratios. The solid content of the ink remained constant over four hours of printing when the optimal dry: wet nitrogen gas ratios were used. Copper ink with 85% ethanol being atomized at 1000 ccm exhibited increase in copper loading (3%) despite the dry: wet solvent add back system.

Library of Congress Subject Headings

Printing ink--Testing; Nanostructured materials--Design and construction

Publication Date


Document Type


Student Type


Degree Name

Industrial and Systems Engineering (MS)

Department, Program, or Center

Industrial and Systems Engineering (KGCOE)


Denis Cormier

Advisor/Committee Member

Scott Williams

Advisor/Committee Member

Marcos Esterman


Physical copy available from RIT's Wallace Library at Z247 .W34 2015


RIT – Main Campus

Plan Codes